Finish Carpenter in Richmond,Virginia. Don't hire a home improvement company,Handyman or a General Contractor to install your wood trim and crown molding or iron balusters hire a Finish Carpenter hire The Finishing Company.
We also install crown molding, chair railing, wainscoting,shadow boxes, wrought iron balusters, stair treads and risers (stair remodeling).
Installing some beautiful wrought iron balusters in Old world copper over the next couple of days. The homeowner has chosen a single twist baluster with a straight bar type baluster alternating with a fancy scroll type baluster strategically thrown in here and there.We supply balusters from the House of Forgings.The Finishing Company can help you order and install your wrought iron balusters.If you are doing do-it-yourself iron balusters we can walk you through your iron balusters installation.Call (804)591-9869 or email us brian@thefinishingcompany.net
We can supply and install wrought iron balusters!
Okay just finished this wrought iron baluster job beside a couple of minor things. Here's the before picture: And the after picture:
These are the iron balusters in the basket series. From left to right, black copper hollow type, black copper solid type, solid satin black. The hollow types are light weight but strong and the finish is pretty much the same. So the shipping is a little cheaper and the cost of the balusters is less expensive. So now more finishes are available for less. Call The Finishing Company for your iron baluster installs. (804)591-9860 in Richnmond Va
Just installed some larger crown molding in a new home in Richmond Va. I installed about 400 Linear feet of a two piece or member colonial type crown molding. It consisted of a 4 1/4 inch beaded base board and then the crown moulding 4 5/8 inches.
First I secured the beaded base board upside down to the studs, then the 4 5/8 crown molding to the studs and the base board and I also toe nailed into the ceiling with some smaller nails. There are lots of different types of moldings and millwork you can combine to make built up crown. There were many corners a good angle finder comes in handy.
Here is a before picture
And the after picture:
And the after picture:
